JEE Advanced Syllabus & Exam Pattern PDF: The Indian Institute of TechnologyKharagpur has released the JEE Advanced Maths, Physics, Chemistry Syllabus on its Official Web portal @ jeeadv.ac.in. The JEE Advanced Exam Pattern is uploaded on this page for the sake of the Candidates who have been preparing for JEE Advanced Exams 2023. Candidates who had applied for JEE 2023 and preparing for JEE Advanced Maths, Physics, and Chemistry Exam 2023 should check this article for JEE Advanced Syllabus and test pattern PDF. Here on this page, we have uploaded the Subject Wise JEE Advanced Maths, Physics, Chemistry Syllabus and Detailed JEE 2023 Exam Pattern to help the Aspirants in their Exam Preparation. So all the Applicants are advised to read this article completely and Download the JEE Advanced Syllabus and Exam Pattern for the Below Section free of cost..
Contents in this Article
 JEE Advanced Syllabus 2023 PDF
 IIT JEE Advanced Exam Pattern 2023
 JEE Main Exam Pattern 2023
 JEE Main Paper 1: B.E./ B. Tech. Exam Pattern
 JEE Main Paper 2A: B.Arch Exam Pattern
 JEE Main Paper 2B: B.Planning
 JEE Main Marking Scheme For B.E./ B. Tech, B.Arch, B.Planning
 Download Subject Wise JEE Advanced Syllabus for Physics, Chemistry, Mathematics 2023
JEE Advanced Syllabus 2023 PDF
Name of the Organization  Indian Institute of TechnologyKharagpur (IIT Kharagpur) 
Exam Name  Joint Entrance Examination Advanced (JEEAdvanced) 
Category  Syllabus 
Official Website  jeeadv.ac.in 
IIT JEE Advanced Exam Pattern 2023
Particulars  Details 
Language  English and Hindi 
Examination Mode  ComputerBased Test (CBT) 
Duration of Exam  3 hours 
Papers in JEE Advanced 2023  Paper I & Paper II 
Sections  3 sections in each paper 
Subjects 

Nature of Questions 

JEE Main Exam Pattern 2023
JEE Main Paper 1: B.E./ B. Tech. Exam Pattern
Subjects  Section A  Section B  Marks 
Mathematics  20  10  100 
Physics  20  10  100 
Chemistry  20  10  100 
Total  90  300 Marks 
JEE Main Paper 2A: B.Arch Exam Pattern
Subject  No of Questions  Marks 
Part I: Mathematics  20 (Section A) and 10 (Section B)  100 
Part II: Aptitude Test  50  200 
Part III: Drawing Test  02  100 
Total  82  400 Marks 
JEE Main Paper 2B: B.Planning
Subject  No of Questions  Marks 
Part I: Mathematics  20 (Section A) and 10 (Section B)  100 
Part II: Aptitude Test  50  200 
Part III: Planning  25  100 
Total  105  400 Marks 
JEE Main Marking Scheme For B.E./ B. Tech, B.Arch, B.Planning
Particulars  BE/ BTech Marking Scheme  BArch Marking Scheme  BPlan Marking Scheme 

Correct Answer  +4 (Four marks awarded)  +4 (Four marks awarded)  +4 (Four marks awarded) 
Incorrect Answer  1 (One mark deducted)  1 (One mark deducted)  1 (One mark deducted) 
Unattempted Question  0 (No marks deducted)  0 (No marks deducted)  0 (No marks deducted) 
Marks per section  Mathematics: 25 questions X 4 marks = 100 marksPhysics: 25 questions X 4 marks = 100 marks Chemistry: 25 questions X 4 marks = 100 marks  Mathematics: 25 questions X 4 marks = 100 marksAptitude Test: 50 questions X 4 marks = 200 marks Drawing test: 2 questions X 50 marks = 100 marks  Mathematics: 25 questions X 4 marks = 100 marksAptitude Test = 50 questions X 4 marks = 200 marks Planning Based Questions = 25 X 4 marks = 100 marks 
Download Subject Wise JEE Advanced Syllabus for Physics, Chemistry, Mathematics 2023
Revised Syllabus to be followed from JEE (Advanced) 2023
PHYSICS
General
General Units and dimensions, dimensional analysis; least count, significant figures; Methods of measurement and error analysis for physical quantities pertaining to the following experiments: Experiments based on using Vernier calipers and screw gauge (micrometer), Determination of g using the simple pendulum, Young’s modulus – elasticity of the material Surface tension of water by capillary rise and effect of detergents. Specific heat of a liquid using a calorimeter, a focal length of a concave mirror and a convex lens using the uv method, Speed of sound using a resonance column, Verification of Ohm’s law using a voltmeter and ammeter, and specific resistance of the material of a wire using meter bridge and post office box.
Mechanics
Kinematics in one and two dimensions (Cartesian coordinates only), projectiles; Uniform circular motion; Relative velocity.
Newton’s laws of motion; Inertial and uniformly accelerated frames of reference; Static and dynamic friction; Kinetic and potential energy; Work and power; Conservation of linear momentum and mechanical energy.
Systems of particles; Centre of mass and its motion; Impulse; Elastic and inelastic collisions. Rigid body, a moment of inertia, parallel and perpendicular axes theorems, a moment of inertia of uniform bodies with simple geometrical shapes; Angular momentum; Torque; Conservation of angular momentum; Dynamics of rigid bodies with fixed axis of rotation; Rolling without slipping of rings, cylinders, and spheres; Equilibrium of rigid bodies; Collision of point masses with rigid bodies. Forced and damped oscillation (in one dimension), resonance.
Linear and angular simple harmonic motions.
Hooke’s law, Young’s modulus.
Law of gravitation; Gravitational potential and field; Acceleration due to gravity; Kepler’s law,
Geostationary orbits, Motion of planets and satellites in circular orbits; Escape velocity.
Pressure in a fluid; Pascal’s law; Buoyancy; Surface energy and surface tension, angle of contact, drops, bubbles and capillary rise. Viscosity (Poiseuille’s equation excluded), Modulus of rigidity and bulk modulus in mechanics. Stoke’s law; Terminal velocity, Streamline flow, equation of continuity, Bernoulli’s theorem and its applications. Wave motion (plane waves only), longitudinal and transverse waves, superposition of waves; Progressive and stationary waves; Vibration of strings and air columns; Resonance; Beats; Speed of sound in gases; Doppler effect (in sound)
Thermal Physics
Thermal expansion of solids, liquids and gases; Calorimetry, latent heat; Heat conduction in one dimension; Elementary concepts of convection and radiation; Newton’s law of cooling; Ideal gas laws; Specific heats (Cv and Cp for monoatomic and diatomic gases); Isothermal and adiabatic processes, bulk modulus of gases; Equivalence of heat and work; First law of thermodynamics and its applications (only for ideal gases); Second law of thermodynamics, reversible and irreversible processes, Carnot engine and its efficiency; Blackbody radiation: absorptive and emissive powers; Kirchhoff’s law; Wien’s displacement law, Stefan’s law.
Electricity and Magnetism
Coulomb’s law; Electric field and potential; Electrical potential energy of a system of point charges and of electrical dipoles in a uniform electrostatic field; Electric field lines; Flux of electric field; Gauss’s law and its application in simple cases, such as, to find field due to infinitely long straight wire, uniformly charged infinite plane sheet and uniformly charged thin spherical shell. Capacitance; Parallel plate capacitor with and without dielectrics; Capacitors in series and parallel; Energy stored in a capacitor.
Electric current; Ohm’s law; Series and parallel arrangements of resistances and cells; Kirchhoff’s
laws and simple applications; Heating effect of current.
Biot–Savart’s law and Ampere’s law; Magnetic field near a currentcarrying straight wire, along the axis of a circular coil and inside a long straight solenoid; Force on a moving charge and on a currentcarrying wire in a uniform magnetic field.
Magnetic moment of a current loop; Effect of a uniform magnetic field on a current loop; Moving coil galvanometer, voltmeter, ammeter and their conversions.
Electromagnetic induction: Faraday’s law, Lenz’s law; Self and mutual inductance; RC, LR, LC and LCR(in series) circuits with d.c. and a.c. sources.
Electromagnetic Waves
Electromagnetic waves and their characteristics. Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, xrays, gamma rays) including elementary facts about their uses.
Optics
Rectilinear propagation of light; Reflection and refraction at plane and spherical surfaces; Total internal reflection; Deviation and dispersion of light by a prism; Thin lenses; Combinations of mirrors and thin lenses; Magnification.
Wave nature of light: Huygen’s principle, interference limited to Young’s double slit experiment. Diffraction due to a single slit. Polarization of light, plane polarized light; Brewster’s law, Polaroids.
Modern Physics
Atomic nucleus; α, β and γ radiations; Law of radioactive decay; Decay constant; Halflife and mean life; Binding energy and its calculation; Fission and fusion processes; Energy calculation in these processes.
Photoelectric effect; Bohr’s theory of hydrogenlike atoms; Characteristic and continuous Xrays,
Moseley’s law; de Broglie wavelength of matter waves.
Revised Syllabus to be followed from JEE (Advanced) 2023
CHEMISTRY
General Topics
Concept of atoms and molecules; Dalton’s atomic theory; Mole concept; Chemical formulae; Balanced chemical equations; Calculations (based on mole concept and stoichiometry) involving common oxidationreduction, neutralisation, and displacement reactions; Concentration in terms of mole fraction, molarity, molality and normality.
States of Matter: Gases and Liquids
Gas laws and ideal gas equation, absolute scale of temperature; Deviation from ideality, van der Waals equation; Kinetic theory of gases, average, root mean square and most probable velocities and their relation with temperature; Law of partial pressures; Diffusion of gases. Intermolecular interactions: types, distance dependence, and their effect on properties; Liquids: vapour pressure, surface tension, viscosity.
Atomic Structure
Bohr model, spectrum of hydrogen atom; Waveparticle duality, de Broglie hypothesis; Uncertainty principle; Qualitative quantum mechanical picture of hydrogen atom: Energies, quantum numbers, wave function and probability density (plots only), shapes of s, p and d orbitals; Aufbau principle; Pauli’s exclusion principle and Hund’s rule.
Chemical Bonding and Molecular Structure
Orbital overlap and covalent bond; Hybridisation involving s, p and d orbitals only; Molecular orbital energy diagrams for homonuclear diatomic species (up to Ne2); Hydrogen bond; Polarity in molecules, dipole moment; VSEPR model and shapes of molecules (linear, angular, triangular, square planar, pyramidal, square pyramidal, trigonal bipyramidal, tetrahedral and octahedral).
Chemical Thermodynamics
Intensive and extensive properties, state functions, First law of thermodynamics; Internal energy, work (pressurevolume only) and heat; Enthalpy, heat capacity, standard state, Hess’s law; Enthalpy of reaction, fusion and vapourization, and lattice enthalpy; Second law of thermodynamics; Entropy; Gibbs energy; Criteria of equilibrium and spontaneity.
Chemical and Ionic Equilibrium
Law of mass action; Significance of ∆ and ∆^{ٓ} in chemical equilibrium; Equilibrium constant (Kp and Kc) and reaction quotient, Le Chatelier’s principle (effect of concentration, temperature and pressure); Solubility product and its applications, common ion effect, pH and buffer solutions; Acids and bases (Bronsted and Lewis concepts); Hydrolysis of salts.
Electrochemistry
Electrochemical cells and cell reactions; Standard electrode potentials; Electrochemical work, Nernst equation; Electrochemical series, emf of galvanic cells; Faraday’s laws of electrolysis; Electrolytic conductance, specific, equivalent and molar conductivity, Kohlrausch’s law; Batteries: Primary and Secondary, fuel cells; Corrosion.
Chemical Kinetics
Rates of chemical reactions; Order and molecularity of reactions; Rate law, rate constant, halflife; Differential and integrated rate expressions for zero and first order reactions; Temperature dependence of rate constant (Arrhenius equation and activation energy); Catalysis: Homogeneous and heterogeneous, activity and selectivity of solid catalysts, enzyme catalysis and its mechanism.
Solid State
Classification of solids, crystalline state, seven crystal systems (cell parameters a, b, c, α, β, γ), close packed structure of solids (cubic and hexagonal), packing in fcc, bcc and hcp lattices; Nearest neighbours, ionic radii and radius ratio, point defects.
Solutions
Henry’s law; Raoult’s law; Ideal solutions; Colligative properties: lowering of vapour pressure,
elevation of boiling point, depression of freezing point, and osmotic pressure; van’t Hoff factor.
Surface Chemistry
Elementary concepts of adsorption: Physisorption and Chemisorption, Freundlich adsorption isotherm; Colloids: types, methods of preparation and general properties; Elementary ideas of emulsions, surfactants and micelles (only definitions and examples).
Classification of Elements and Periodicity in Properties
Modern periodic law and the present form of periodic table; electronic configuration of elements; periodic trends in atomic radius, ionic radius, ionization enthalpy, electron gain enthalpy, valence, oxidation states, electronegativity, and chemical reactivity.
Hydrogen
Position of hydrogen in periodic table, occurrence, isotopes, preparation, properties and uses of hydrogen; hydrides – ionic, covalent and interstitial; physical and chemical properties of water, heavy water; hydrogen peroxidepreparation, reactions, use and structure; hydrogen as a fuel.
sBlock Elements
Alkali and alkaline earth metalsreactivity towards air, water, dihydrogen, halogens, acids; their reducing nature including solutions in liquid ammonia; uses of these elements; general characteristics of their oxides, hydroxides, halides, salts of oxoacids; anomalous behaviour of lithium and beryllium; preparation, properties, and uses of compounds of sodium (sodium carbonate, sodium chloride, sodium hydroxide, sodium hydrogen carbonate) and calcium (calcium oxide, calcium hydroxide, calcium carbonate, calcium sulphate).
pBlock Elements
Oxidation state and trends in chemical reactivity of elements of groups 1317; anomalous properties of boron, carbon, nitrogen, oxygen, and fluorine with respect to other elements in their respective groups.
Group 13: Reactivity towards acids, alkalis, and halogens; preparation, properties, and uses of borax, orthoboric acid, diborane, boron trifluoride, aluminium chloride, and alums; uses of boron and aluminium.
Group 14: Reactivity towards water and halogen; allotropes of carbon and uses of carbon; preparation, properties, and uses of carbon monoxide, carbon dioxide, silicon dioxide, silicones, silicates, zeolites.
Group 15: Reactivity towards hydrogen, oxygen, and halogen; allotropes of phosphorous; preparation, properties, and uses of dinitrogen, ammonia, nitric acid, phosphine, phosphorus trichloride, phosphorus pentachloride; oxides of nitrogen and oxoacids of phosphorus.
Group 16: Reactivity towards hydrogen, oxygen, and halogen; simple oxides; allotropes of sulfur; preparation/manufacture, properties, and uses of dioxygen, ozone, sulfur dioxide, sulfuric acid; oxoacids of sulfur.
Group 17: Reactivity towards hydrogen, oxygen, and metals; preparation/manufacture, properties, and uses of chlorine, hydrogen chloride and interhalogen compounds; oxoacids of halogens, bleaching powder.
Group 18: Chemical properties and uses; compounds of xenon with fluorine and oxygen.
dBlock Elements
Oxidation states and their stability; standard electrode potentials; interstitial compounds; alloys; catalytic properties; applications; preparation, structure, and reactions of oxoanions of chromium and manganese.
fBlock Elements
Lanthanoid and actinoid contractions; oxidation states; general characteristics.
Coordination Compounds
Werner’s theory; Nomenclature, cis–trans and ionization isomerism, hybridization and geometries (linear, tetrahedral, square planar and octahedral) of mononuclear coordination compounds; Bonding [VBT and CFT (octahedral and tetrahedral fields)]; Magnetic properties (spinonly) and colour of 3dseries coordination compounds; Ligands and spectrochemical series; Stability; Importance and applications; Metal carbonyls.
Isolation of Metals
Metal ores and their concentration; extraction of crude metal from concentrated ores: thermodynamic (iron, copper, zinc) and electrochemical (aluminium) principles of metallurgy; cyanide process (silver and gold); refining.
Principles of Qualitative Analysis
Groups I to V (only Ag^{+} , Hg^{2+}, Cu^{2+}, Pb^{2+}, Fe^{3+}, Cr^{3+}, Al^{3+}, Ca^{2+}, Ba^{2+}, Zn^{2+}, Mn^{2+} and Mg^{2+}); Nitrate, halides (excluding fluoride), carbonate and bicarbonate, sulphate and sulphide.
Environmental Chemistry
Atmospheric pollution; water pollution; soil pollution; industrial waste; strategies to control environmental pollution; green chemistry.
Basic Principles of Organic Chemistry
Hybridisation of carbon; σ and πbonds; Shapes of simple organic molecules; aromaticity; Structural and geometrical isomerism; Stereoisomers and stereochemical relationship (enantiomers, diastereomers, meso) of compounds containing only up to two asymmetric centres
(R,S and E,Z configurations excluded); Determination of empirical and molecular formulae of simple compounds by combustion method only; IUPAC nomenclature of organic molecules (hydrocarbons, including simple cyclic hydrocarbons and their monofunctional and bifunctional derivatives only); Hydrogen bonding effects; Inductive, Resonance and Hyperconjugative effects; Acidity and basicity of organic compounds; Reactive intermediates produced during homolytic and heterolytic bond cleavage; Formation, structure and stability of carbocations, carbanions and free radicals.
Alkanes
Homologous series; Physical properties (melting points, boiling points and density) and effect of branching on them; Conformations of ethane and butane (Newman projections only); Preparation from alkyl halides and aliphatic carboxylic acids; Reactions: combustion, halogenation (including allylic and benzylic halogenation) and oxidation.
Alkenes and Alkynes
Physical properties (boiling points, density and dipole moments); Preparation by elimination reactions; Acid catalysed hydration (excluding the stereochemistry of addition and elimination); Metal acetylides; Reactions of alkenes with KMnO4 and ozone; Reduction of alkenes and alkynes; Electrophilic addition reactions of alkenes with X2, HX, HOX, (X=halogen); Effect of peroxide on addition reactions; cyclic polymerization reaction of alkynes.
Benzene
Structure; Electrophilic substitution reactions: halogenation, nitration, sulphonation, Friedel Crafts alkylation and acylation; Effect of directing groups (monosubstituted benzene) in these reactions.
Phenols
Physical properties; Preparation, Electrophilic substitution reactions of phenol (halogenation, nitration, sulphonation); ReimerTiemann reaction, Kolbe reaction; Esterification; Etherification; Aspirin synthesis; Oxidation and reduction reactions of phenol.
Alkyl Halides
Rearrangement reactions of alkyl carbocation; Grignard reactions; Nucleophilic substitution reactions and their stereochemical aspects.
Alcohols
Physical properties; Reactions: esterification, dehydration (formation of alkenes and ethers); Reactions with: sodium, phosphorus halides, ZnCl2/concentrated HCl, thionyl chloride; Conversion of alcohols into aldehydes, ketones and carboxylic acids.
Ethers
Preparation by Williamson’s synthesis; CO bond cleavage reactions.
Aldehydes and Ketones
Preparation of: aldehydes and ketones from acid chlorides and nitriles; aldehydes from esters; benzaldehyde from toluene and benzene; Reactions: oxidation, reduction, oxime and hydrazone
formation; Aldol condensation, Cannizzaro reaction; Haloform reaction; Nucleophilic addition reaction with RMgX, NaHSO3, HCN, alcohol, amine.
Carboxylic Acids
Physical properties; Preparation: from nitriles, Grignard reagents, hydrolysis of esters and amides; Preparation of benzoic acid from alkylbenzenes; Reactions: reduction, halogenation, formation of esters, acid chlorides and amides.
Amines
Preparation from nitro compounds, nitriles and amides; Reactions: Hoffmann bromamide degradation, Gabriel phthalimide synthesis; Reaction with nitrous acid, Azo coupling reaction of diazonium salts of aromatic amines; Sandmeyer and related reactions of diazonium salts; Carbylamine reaction, Hinsberg test, Alkylation and acylation reactions.
Haloarenes
Reactions: Fittig, WurtzFittig; Nucleophilic aromatic substitution in haloarenes and substituted haloarenes (excluding benzyne mechanism and cine substitution).
Biomolecules
Carbohydrates: Classification; Mono and disaccharides (glucose and sucrose); Oxidation; Reduction; Glycoside formation and hydrolysis of disaccharides (sucrose, maltose, lactose); Anomers.
Proteins: Amino acids; Peptide linkage; Structure of peptides (primary and secondary); Types of proteins (fibrous and globular).
Nucleic acids: Chemical composition and structure of DNA and RNA.
Polymers
Types of polymerization (addition, condensation); Homo and copolymers; Natural rubber; Cellulose; Nylon; Teflon; Bakelite; PVC; Biodegradable polymers; Applications of polymers.
Chemistry in Everyday Life
Drugtarget interaction; Therapeutic action, and examples (excluding structures), of antacids, antihistamines, tranquilizers, analgesics, antimicrobials, and antifertility drugs; Artificial sweeteners (names only); Soaps, detergents, and cleansing action.
Practical Organic Chemistry
Detection of elements (N, S, halogens); Detection and identification of the following functional groups: hydroxyl (alcoholic and phenolic), carbonyl (aldehyde and ketone), carboxyl, amino and nitro.
Revised Syllabus to be followed from JEE (Advanced) 2023
MATHEMATICS
Sets, Relations and Functions
Sets and their representations, different kinds of sets (empty, finite and infinite), algebra of sets, intersection, complement, difference and symmetric difference of sets and their algebraic properties, DeMorgan’s laws on union, intersection, difference (for finite number of sets) and practical problems based on them.
Cartesian product of finite sets, ordered pair, relations, domain and codomain of relations, equivalence relation
Function as a special case of relation, functions as mappings, domain, codomain, range of functions, invertible functions, even and odd functions, into, onto and onetoone functions, special functions (polynomial, trigonometric, exponential, logarithmic, power, absolute value, greatest integer etc.), sum, difference, product and composition of functions.
Algebra
Algebra of complex numbers, addition, multiplication, conjugation, polar representation, properties of modulus and principal argument, triangle inequality, cube roots of unity, geometric interpretations.
Statement of fundamental theorem of algebra, Quadratic equations with real coefficients, relations between roots and coefficients, formation of quadratic equations with given roots, symmetric functions of roots.
Arithmetic and geometric progressions, arithmetic and geometric means, sums of finite arithmetic and geometric progressions, infinite geometric series, sum of the first n natural numbers, sums of squares and cubes of the first n natural numbers.
Logarithms and their properties, permutations and combinations, binomial theorem for a positive integral index, properties of binomial coefficients.
Matrices
Matrices as a rectangular array of real numbers, equality of matrices, addition, multiplication by a scalar and product of matrices, transpose of a matrix, elementary row and column transformations, determinant of a square matrix of order up to three, adjoint of a matrix, inverse of a square matrix of order up to three, properties of these matrix operations, diagonal, symmetric and skewsymmetric matrices and their properties, solutions of simultaneous linear equations in two or three variables.
Probability and Statistics
Random experiment, sample space, different types of events (impossible, simple, compound), addition and multiplication rules of probability, conditional probability, independence of events, total probability, Bayes Theorem, computation of probability of events using permutations and combinations.
Measure of central tendency and dispersion, mean, median, mode, mean deviation, standard deviation and variance of grouped and ungrouped data, analysis of the frequency distribution with same mean but different variance, random variable, mean and variance of the random variable.
Trigonometry
Trigonometric functions, their periodicity and graphs, addition and subtraction formulae, formulae involving multiple and submultiple angles, general solution of trigonometric equations.
Inverse trigonometric functions (principal value only) and their elementary properties.
Analytical Geometry
Two dimensions: Cartesian coordinates, distance between two points, section formulae, shift of origin.
Equation of a straight line in various forms, angle between two lines, distance of a point from a line; Lines through the point of intersection of two given lines, equation of the bisector of the angle between two lines, concurrency of lines; Centroid, orthocentre, incentre and circumcentre of a triangle.
Equation of a circle in various forms, equations of tangent, normal and chord. Parametric equations of a circle, intersection of a circle with a straight line or a circle, equation of a circle through the points of intersection of two circles and those of a circle and a straight line.
Equations of a parabola, ellipse and hyperbola in standard form, their foci, directrices and eccentricity, parametric equations, equations of tangent and normal.
Locus problems.
Three dimensions: Distance between two points, direction cosines and direction ratios, equation of a straight line in space, skew lines, shortest distance between two lines, equation of a plane, distance of a point from a plane, angle between two lines, angle between two planes, angle between a line and the plane, coplanar lines.
Differential Calculus
Limit of a function at a real number, continuity of a function, limit and continuity of the sum, difference, product and quotient of two functions, L’Hospital rule of evaluation of limits of functions.
Continuity of composite functions, intermediate value property of continuous functions. Derivative of a function, derivative of the sum, difference, product and quotient of two functions, chain rule, derivatives of polynomial, rational, trigonometric, inverse trigonometric, exponential and logarithmic functions.
Tangents and normals, increasing and decreasing functions, derivatives of order two, maximum and minimum values of a function, Rolle’s theorem and Lagrange’s mean value theorem, geometric interpretation of the two theorems, derivatives up to order two of implicit functions, geometric interpretation of derivatives.
Integral Calculus
Integration as the inverse process of differentiation, indefinite integrals of standard functions, definite integrals as the limit of sums, definite integral and their properties, fundamental theorem of integral calculus.
Integration by parts, integration by the methods of substitution and partial fractions, application of definite integrals to the determination of areas bounded bysimple curves. Formation of ordinary differential equations, solution of homogeneous differential equations of first order and first degree, separation of variables method, linear first order differential equations.
Vectors
Addition of vectors, scalar multiplication, dot and cross products, scalar and vector triple products, and their geometrical interpretations.